1 Q50 Cat Back Exhausts Performance OEM and Aftermarket Engineered Parts Global Leader In 300ZX 350Z 370Z G35 G37 Q50 Q60
Lilian Oliva edited this page 4 days ago

We want to make sure the part fits your specific vehicle so we need a little more information from you. You can find out by inspecting the emissions sticker that is located in your engine compartment.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

This picture is looking at the manifold end has a 60mm inlet ID and a 3 bolt flange where the outlet end has a 2 bolt flange and a 50mm outlet ID. Increasing your engine’s torque output gives you the power you need to haul heavy payloads and tow trailers, boats, campers, and more. The Carven-TR Series Performance Muffler delivers a deeper sound with a lower tone. Bradley’s Auto Service is proud to be affiliated with TechNet, a network of more than 12,000 locally owned repair shops that are focused on delivering quality care to the communities they serve. When you have any kind of automotive work done by us or another TechNet-affiliated shop, you are covered nationwide.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

As a result, our popularity has increased, and we work tirelessly to maintain our quality systems while fulfilling orders. Please be aware that while we typically exceed our estimated wait times, we have been successfully operating for three years and no customer has ever been left without their system, or a cancellation/refund. At Rae, we are expanding our team and investing in additional resources and machines to ensure we stay at the forefront of innovation. With our ambitious plans, we are on track to meet demand and increase our inventory of premium parts by the end of the year. Please note that purchasing this product is agreeing to understand this concept. Amplify your vehicle's performance and sound with Full-Race's premium Exhaust systems - reliable power and efficiency harmonize with a brand that’s trusted for quality and performance.

The package is designed to maximize the performance of the Ford Mustang giving the vehicle a wider track with all the necessary suspension and braking systems to balance out the package. Introducing the 2024 Roush F-150, the perfect fusion of bold design, aggressive styling and high-performance upgrades. Each of the twin pipes are 50mm and the junction is 60mm but it quickly necks down to 50mm as it enters the center resonator. The resonator is a straight through 50mm perforated tube and some high frequency sound is absorbed.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz's reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

Installation was easy, and the craftsmanship and welds are very high quality. Mishimoto exhausts are constructed of large diameter mandrel-bent pipes for maximum flow. Mishimoto exhausts are perfectly engineered to provide an aggressively rich tone with no annoying highway drone. In general, though, you can expect to pay anywhere from $1000 upwards for a good cat back exhaust system. That may seem like a lot of money, but keep in mind that a cat back exhaust can provide a significant boost to your car's performance and help it to stand out from the crowd. Typically a cat-back exhaust upgrade can be swapped with the original exhaust without any modifications.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

Everything you love about our MK7 Golf range has been re-engineered to suit MK7.5. Enjoy an unparalleled experience, power and sound output coupled with a seamless fit. Trucks are all about dependability and capability, which is why MagnaFlow engineers every one of our durable, corrosion resistant stainless-steel exhausts to last the lifetime of your vehicle. One of the things you would appreciate about the axle-back exhaust system is that it offers better sound improvement.

The time and money you spend are a big investment, and we want to help you make the best decision for your driving dreams. Typically, a cat-back exhaust system will increase your car’s horsepower by somewhere between 5 and 50 brake horsepower. This will vary greatly depending on the condition of your exhaust and engine, so you should ask your mechanic if getting a cat-back exhaust is the best way to improve the performance of your car.

Noticeable gains will be noticed in the initial throttle response, with reduced turbo lag. Engine movement and exhaust weight are transferred into the exhaust hangers, which puts a lot of stress on the mount brackets. IE's catback system is manufactured with multi-point and boxed-in hanger mounts designed to stand the test of time. Drive confidently knowing your exhaust is securely mounted and protected against annoying rattles or breaks. All piping is constructed of mandrel-bent T304L stainless steel to offer superior corrosion resistance.

Unlike your stock system, CORSA exhaust systems don't utilize performance-robbing restrictions that reduce airflow, such as chambered designs, baffles or spring-loaded valves. With wider tubing and our mandrel-bent design, your new full exhaust system will allow for reduced backpressure and provide cleaner oxygenized air to your engine. You'll see benefits like increased horsepower, torque boost and better fuel economy.

Stock exhaust systems do not give the deep and aggressive growl most motor enthusiasts desire. Let everyone hear you coming with an aftermarket cat-back exhaust on your Chevrolet Camaro. Your Chevrolet Camaro stock exhaust is pretty good, but its just not enough. No matter if you drive a Camaro V6, Camaro LT1 or Camaro SS Phastek has the best exhaust option for your ride! If you can't decide between an axle-back or a cat-back, checkout our blog to help you decide.

To make a very long story short so far so good I’m happy with the product. I had 1 dinged tip out of the 4 that prob happened during shipping n y’all already have a new replacement tip on the way so customer service is great as well. Only thing I would change as previously stated would be a little more noise but again that wasn’t my main goal to being with. Hats off to what y’all do and please make more B9 Audi S4 parts n I’ll happily buy them. I regret not buying the IE intake but hey sometimes we all make poor decisions lol. Every vehicle-specific CORSA product is engineered and designed to match the unique properties of the vehicle it is designed for to deliver perfect fitment and performance.

Advanced 3D scanning tools and cutting-edge software provide our engineers with a high-resolution digital model of the Audi B9 S4 chassis. This data is then used to maximize the exhaust size for flow and optimize all available space for the perfect catback fitment. CORSA branded exhaust systems are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. The new exhaust sounds perfect, a marked improvement over stock. It is not too loud - I use the car as a daily driver and drive in capital beltway traffic.

When it comes to improving your vehicle’s performance, you have two options. However, stainless still can be very expensive, as opposed to aluminized steel which is very affordable. It is also resistant to corrosion, just not to the level of stainless steel. Since there is no back pressure and the diameter is large enough, the engine will not use a lot of energy to push the exhausts out. While getting a cat-back performance exhaust system can be pricier initially, it can save on a lot of costs in the future. These exhaust pipes are usually wrapped in sound-absorbing materials, mostly fiberglass packing.

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. With additional power from idle to redline, we’ve carefully tuned this bad boy to free up power without the annoying drone that often comes in V6 exhaust. Explore further with higher exhaust clearance and experience the sound of adventure.

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts